Go back

Toll Rolling

Builders - Manufacturers - Project managers - Fabricators

Save $$$ by toll rolling your own steel

Mecano are now offering Toll Rolling for customers who require bulk materials.
Customers may purchase steel coils from a supplier such as Bluescope^®, or purchase bulk coil from Mecano, and have the coil rolled at a l/meter rate.

To enquire about toll rolling, please call Mecano on (07) 54825614, or use the enquiry form below to send us an email.

Toll Rolling Charges

(Prices based on current Bluescope^® coil costs)

Minimum 1 tonne for toll rolling charges.

Angle trim, ceiling batten, stud framing - 750 kilos minimum.

We are able to Roll the Following products :

- C sections and Purlins
- Nesting channels
- Top hats
- Stud Framing - Stud plate and Noggin
- Ceiling battens
- Angle trims
- Brackets
- Custom flashing
- Gutter and Capping
- Cutting and Folding
- Roofing

Topspan

	Meters per tonne	Toll charge	Estimated Manufactured cost*
64x.55	1034 m	$0.60 p/lm	$2.10 p/lm
64x.75	771 m	$0.75 p/lm	$2.77 p/lm
64x1mm	615 m	$1.00 p/lm	$3.46 p/lm

125x1mm	349 m	$1.00 p/lm	$5.33 p/lm

C-Section

C section flange dimensions are all 75mm.

	Meters per tonne	Toll charge	Estimated Manufactured cost*
150C12	344 m	$2.00 p/lm	$6.77 p/lm
150C15	259 m	$2.50 p/lm	$8.48 p/lm
150C19	206 m	$3.00 p/lm	$10.16 p/lm
150C24	163 m	$3.50 p/lm	$12.55 p/lm

200C15	224 m	$4.00 p/lm	$10.70 p/lm
200C19	178 m	$4.50 p/lm	$12.79 p/lm
200C24	141 m	$4.75 p/lm	$15.21 p/lm

250C19	157 m	$5.00 p/lm	$14.39 p/lm
250C24	124 m	$6.00 p/lm	$17.90 p/lm

300C24	111 m	$7.50 p/lm	$20.79 p/lm

Nesting Channels

	Meters per tonne	Toll charge	Estimated Manufactured cost*
150C15	286 m	$4.00 p/lm	$9.24 p/lm
150C24	180 m	$4.00 p/lm	$12.33 p/lm

200C24	163 m	$4.50 p/lm	$13.55 p/lm

250C24	141 m	$5.00 p/lm	$15.46 p/lm

300C24	124 m	$6.00 p/lm	$17.90 p/lm

Stud, Plate and Noggin (unpunched)

(note : wall dimensions may be required)

	Meters per tonne	Toll charge	Estimated Manufactured cost*
80x30x.75	1226 m	$0.75 p/lm	$2.01 p/lm
80x30x1mm	978 m	$1.00 p/lm	$2.54 p/lm

Stud, Plate and Noggin (punched)

(note : wall dimensions may be required)

Hole punching 28mm elongated in web only.

	Meters per tonne	Toll charge	Estimated Manufactured cost*
80x30x.75	1226 m	$1.50 p/lm	$2.76 p/lm
80x30x1mm	978 m	$1.85 p/lm	$3.39 p/lm

Angle Trim and Ceiling Batten

.60 .75 or .95 Angle trim

.42 Ceiling Batten

Due to many variables, angle trim and ceiling Batten are price on appliction.

Trimclad

.42 or .47 thick x940mm sheet(770mm cover)

.75 cents to $1.50 per l/meter (depending on length variations )

Quad gutter

POA - 50 cents to $1.00

Custom flashings

POA - Max lengths 4.3m

Bending/folding

POA - Max length 4.3m x 4mm

* Please note that "Estimated manufactured costs" are estimates based on current Bluescope^® coil costs.
Customers would buy the steel coil, and Mecano will roll it out at the Toll charge specified for that product

General Enquiry


Metal Clad Houses	Granny Flats	Sheds	Deluxe Garages	Novelty Sheds	Carports	Barns

Click here to bookmark this website

Metal Clad Kit Homes		Garage	Carport	Cabins	Garden Shed	Shade Shelter
Industrial	Farm Shed	Novelty Shed	Deluxe Garage	Barn	Materials	Steel Floor